![]() If the MPEG2 encoder is unable to modify the video to a fixed frame rate, the video will have jitter when played back on a television. Problems happen when the MPEG2 encoder tries to conform the video back to a standard frame rate. If you export HD video containing mixed frame rates from your sequence in Final Cut Pro, you may find problems on your finished DVD. While the original mini-DV camcorders only recorded in two frame rate, HD video cameras are capable of recording in non-standard rates, such as 50p, 60p, 48p, and 24p. As you can see, there’s a lot of resizing that must be done to HD video to fit on a DVD.ĭVD video supports only two types of frame rates which are 29.97 for NSTC and 25 for PAL. By using the same pixels per inch scale as your 4圆 photo, a 1080 HD photo would 16 inches wide by 9 inches high. To understand how much smaller your HD video is when delivered on DVD, think of your DVD screen as being a 4 inch by 6 inch photo. The picture size difference between HD and DVD video is often the cause. Many people claim that HD footage looks blurry on DVD, but looks great in Final Cut Pro. ![]() Video ripped from a DVD with DVDXDV should always play properly in Final Cut Pro. This is needed to spot compression problems on your DVD. The next most valuable tool is good DVD ripper that you can convert your footage from the DVD so that it can be played in Final Cut Pro. The video must go through a capture card first, so that the video signal is interlaced and encoded with the correct colors. You cannot directly connect an HDMI or S-Video output from your Mac to your TV. To do this, you can use a firewire DV converter, an HD-SDI output, an HDMI output, or component output from a capture card to connect Final Cut Pro to a television monitor. ![]() Playing the video out of Final Cut Pro to your television monitor will help you spot problems in the DVD encoding process. If you plan to author a DVD, your most valuable tool will be interlaced television monitor attached to Final Cut Pro. This article will show you how divide up your DVD encoding workflow DVD using the tools in Final Cut Studio. ![]() Always break down the DVD encoding workflow into multiple steps and check the video at each step. To avoid these problems, you must make your video simple to encode for DVD. However, mixed frame rates and video sizes are difficult to encode for DVD and can cause jitter and resizing artifacts on DVD. Editing HD video containing mixed frame rates and different frame sizes is fairly common. HD video supports many different frame rates and resolutions. Therefore, most of the video transferred to DVDs now comes from HD video cameras. The vast majority of video cameras now sold shoot HD (High Definition) video. Other Links: rip DVDs to iMovie, rip a DVD to an iPad, rip a DVD to an iPhone, AVCHD,MTS, Blu-ray to Quicktime Transferring HD Video to DVDĬonverting HD video to a DVD isn’t nearly as easy as it sounds. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |